S21+

World-class mixing at an astonishing price 


  • 60 Flexi Input Channels
  • 24 Flexi Aux / Sub-Group Busses
  • M, LR, LCR or LR M Master Buss
  • 10 x 8 Full Processing Matrix
  • 21 Dynamic Equalizers
  • 96kHz Sample Rate

S21+ 주요 기능



S21+ : 제품 특징

DiGiCo’s world-renowned innovation, deep feature-set and flagship audio quality of our high-end digital consoles is within reach of everyone. How? Meet the S21+ – a world-class DiGiCo mixing console at an astonishing price.

Step up to the S21+’s worksurface, complete with dual P-CAP multi-touch screens, 60 flexi-channels, 24 buses and benchmark 96kHz performance, and this console’s heritage is clear – the S21+ is every inch a DiGiCo desk. It’s also a revelation in terms of what an introductory digital console can deliver.

Based on the same pioneering design approach as the industry-leading SD series, the S21+ boasts the same proprietary audio algorithms plus a new ARM QuadCore RISC processor which runs in harmony with the FPGA core. The result is faster processing with lower power consumption, all packaged in the workflow that the industry’s most respected engineers rely upon – now available to everyone.

Under the Hood

Familiar to the touch and built for the road, the S21+ offers mixing without limits. The integration of a high power QuadCore SoC with high bandwidth memory, a low power 484-ball array FPGA and a fourth-generation control SHARC DSP offers unprecedented power today as well as the potential for a future processing upgrade path. The compact footprint of the S21+ has no relationship to the scale of processing power going on under the polycarbonate worksurface.

The two touchscreens each provide 10 channel strips, giving not only clear visual feedback and control of 20 simultaneous channels for a single user, but also the possibility when mixing large shows for more than one operator to take advantage of the newly designed drag, swipe and drop feature that simplifies custom fader layouts.

Visual feedback is further reinforced by the HTL (Hidden Till Lit) functionality of the encoder rings, while parameters currently not in use are automatically greyed out, always drawing your attention to the right controls.

The dual screen concept aims to aid the new user learning curve and remove distractions by not only giving you more channels to view at any one time, but also allowing one screen to be used as a setup or master whilst the other is utilised for operation. Both touchscreens are responsive to EQ shaping, with fine-tuning available via the tactile and intuitive rotary encoders.

Altering the Channel Bank layout, and mixing and matching any channel, aux, group, control group, or matrix within a bank, is easily accomplished by drag and drop at the touch of a screen.

I/O

The S21+’s local I/O section includes 24 mic/line inputs, 12 line outs, two mono AES/EBU, and two DMI (DiGiCo Multichannel Interface) card slots which interface to standard industry formats such as Analogue, MADI, Dante, Waves SoundGrid, or Calrec’s Hydra 2 Network.

The console connects seamlessly with the DiGiCo remote I/O D-Rack providing an additional 32 inputs and up to 16 outputs.

Get instant access to 32 fully integrated low-latency Waves stereo MultiRacks, each with up to eight plug-ins per rack, by fitting the DiGiCo SoundGrid DMI card linked to external SoundGrid or DiGiGrid servers, giving a total of 128 additional I/O.


Interfacing

S21은 완벽한 확장성을 위한 두개의 DMI(DiGiCo Multichannel Interface) 옵션 카드 슬롯을 제공 합니다. Analogue expansion, MADI, Dante, Optocore, Waves SoundGrid, Calrec's Hydra 2 Network 같은 여러  포맷들과 접속 할 수 있습니다.


옵션


S21 : 제품 사양

General Specifications

  • 60 x Input flex-channels Mono/Stereo (equivalent of 120 DSP channels)
  • 63 busses: 24 x flexi-busses Mono/Stereo (equivalent of 48 DSP busses), Mono, Stereo, LCR or LR M Master (3), Solo busses (2 stereo, 4 total), and 10 x 8 Matrix (8)
  • 10 x Control Groups
  • 1 x Compressor per channel and buss
  • 1 x Gate per channel and buss (switchable to ducker, or compressor with side chain access)
  • 16 x assignable 32 band Graphic EQs
  • 8 x FX engines (reverbs, delays, w/modulation and enhancer)
  • 21 x assignable DiGiTuBes
  • 21 x assignable Multiband Compressors
  • 21 x assignable Dynamic EQs
  • User definable Macros
  • An extremely high power headphone amplifier with 1/4 inch and mini jack socket.
  • 96kHz as standard
  • 24 mic/line inputs
  • 12 analogue outs
  • 2 AES/EBU I/O (mono)
  • Word Clock I/O
  • 1 GPI and 1 GPO
  • DVI out (for an external monitor)
  • 2 DMI Card slots (up to 64 I/O per slot)
  • 2 Ethernet connections for Networking
  • 2 x 24 segment master/solo meters
  • Touch sensitive rotaries with integrated switch & HTL
  • 3 x multi-touch screens
  • 31 x touch sensitive moving faders
  • 4 x layers of banks of 10 faders
  • Customisable bank and channel layout
  • Snapshots
  • Integrated USB2 Audio I/O interface for recording and playback of up to 48 channels


Audio Specification

  • Sample Rate 48kHz, 96kHz
  • Processing Delay 2ms Typical @ 48k (48 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @ 96kHz
  • Internal Processing Up to 40-bit, Floating Point
  • A>D & D>A 24-bit Converter Bit Depth
  • Frequency Response +/- 0.6dB (20Hz – 20kHz)
  • THD <0.05% @ Unity Gain, 10dB Input @ 1kHz
  • Channel Separation Better Than 90dB (40Hz – 15kHz)
  • Residual Output <90dBu Typical
  • Noise (20Hz – 20kHz)
  • Microphone Input Better Than -126dB Equivalent Noise
  • Maximum Output Level +22dBu
  • Maximum Input Level +22dBu


Processing Channel Specification
Input Channel

  • Input Name: User-Defined
  • Channel Selection: Mono / Stereo
  • Input Routing: Main Input
  • Analogue Gain: -20 to +60dB
  • Phase: Normal / Reverse
  • Digital Trim: 40 to +40dB
  • Delay: 0 – 682ms
  • DiGiTuBe Drive: 0.01 – 50.0
  • Bias: 0 – 6
  • LPF: 20 – 20kHz, 24dB/Oct
  • HPF: 20 – 20kHz, 24dB/Oct
  • Insert A: (Pre EQ/Dyn) On/Off
  • Equalisation 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hishelf, Hi/Hishelf)
    On/Off
    Freq; 20 – 20kHz
    Gain; +/- 18dB
    Q: 0.1 -20 (Parametric) / 0.10-0.90 (Shelf)
  • Dynamics 1: Single or 4 x Multiband (3-Band)
    Compressor; On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 5ms – 5s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    Hi Crossover; 20Hz – 20kHz
    Lo Crossover; 20Hz – 20kHz
    Knee; Hard, Med, Soft
  • Dynamics 2: On/Off
    Gate / Ducker Threshold; -60 – 0dB
    Attack; 50us – 100ms
    Hold; 2ms – 2s
    Release; 5ms – 5s
    Range; 0 – 90dB
    Key; Any Source
    Key Listen
    Freq/Width; 20 – 20kHz
    Compressor; On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 5ms – 5s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    Link; Any Channel / Buss
    S/C Source : Any Source
    S/C Listen : On/Off
    S/C Filter Freq/Width: 20Hz – 20kHz
  • Insert B: (Post EQ/Dyn) On/Off
  • Mute: Channel Mute
  • Solo: Solo Buss 1 / Solo Buss 2 / Both,
  • Channel Safe: Socket Properties, Input Route, Mono/Stereo, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Aux, Group Assigns, Pan, Fade, Mute, Direct Outs, Full Safe
  • Output: Routing Buss,
  • Insert A, Insert B,
  • Direct: Post-Fade
  • Fader: 100mm Motorised Fader ∞ to +10dB


Processing Channel Specification
Aux / Group / Matrix Output

  • Name: User-Defined
  • Phase: Normal / Reverse
  • Digital Trim: -40 to +40dB
  • Delay: 0 – 682ms
  • DiGiTuBe Drive: 0.01 – 50.0 Bias 0 – 6
  • LPF: 20 – 20kHz, 24dB / Oct
  • HPF: 20 – 20kHz, 24dB / Oct
  • Insert A: (Pre EQ/Dyn) On/Off
  • Equalisation 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hishelf, Hi/Hishelf)
    On/Off
    Freq; 20 – 20kHz
    Gain; +/- 18dB
    Q: 0.1 -20 (Parametric) / 0.10-0.90 (Shelf)
  • Dynamics 1: Single or 4 x Multiband (3-band)
    Compressor; On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 5ms – 5s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    Hi Crossover; 20Hz – 20kHz
    Lo Crossover; 20Hz – 20kHz
    Knee; Hard, Med, Soft
  • Gate / Ducker Threshold; -60 – 0dB
    Attack; 50us – 100ms
    Hold; 2ms – 2s
    Release; 5ms – 5s
    Range; 0 – 90dB
    Key; Any Source
    Key Listen
    Freq/Width; 20 – 20kHz
    Compressor On/Off
    Threshold; -60 – 0dB
    Attack; 500us – 100ms
    Release; 5ms – 5s
    Ratio; 1:1 – 50:1
    Gain; 0 to +40dB
    Link; Any Channel/Buss
    S/C Source: Any source
    S/C Listen: On/Off
    S/C Filter Freq/Width: 20Hz – 20kHz
  • Insert B: (Post EQ/Dyn) On/Off
  • Mute: Channel Mute
  • Solo: Solo Buss 1 / Solo Buss 2 / Both,
  • Channel Safe: Mono/Stereo, Bus Mode, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Group Assigns, Fade, Mute, Direct Outs, Full Safe
  • Output Routing: Outputs, Insert A, Insert B
  • Fader: 100mm Motorised Fader ∞ to + 10dB

엔지니어들에게 인정받은 음질과, 엔지니어들에게 선택되어진 UI, 엔지니어들을 위한 수많은 편의기능 등, 최고의 엔지니어들이 선택한 믹싱툴 DiGiCo,
DiGiCo가 구현하는 기술은 현재 음향시장의 기술력을 대변하고 있음과 동시에 미래의 음향시장의 개척점에 의심없이 위치할 것이라는 것을, 
그간 DiGiCo가 걸어온 역사에서 기록되어지고 있으며, 입증되고 있습니다. 
DiGiCo는 최고의 퍼포먼스를 요하는 모든 상황에서, 최고의 엔지니어들과 함께, 최고의 사운드를 품고 있습니다.
디지털콘솔의 범주를 넘어선 최고의 사운드기어 DiGiCo를 여러분께 추천합니다.